32-bit ARM
®
Cortex
TM
-M3 MCU
HT32 Series
Setting Flash Loader
The Flash loader is used to download the program into the on-chip Flash memory. It is an agent
that acts on the SRAM to receive data from the host PC (through the USB debug adapter) and
program this data into the Flash memory.
1. Open the "Debug Configurations" dialog.
2. In the "DownLoad" tab, check "Auto Download Before Debugging" and the application will
then be pre-loaded in "Debug mode".
Figure 25. Debug Configurations Dialog – DownLoad tab
Rev. 1.00
�1/35
�01��0����