Figure 19. Select Chip For The Project; Figure 20. Check A Component For The Project - Holtek HT32 Series Quick Start Manual

32-bit ARM ® Cortex TM -M3 MCU
HT32 Series
5. Select chip, for example: HT32F1755. The right side will display the corresponding chip
information.

Figure 19. Select Chip for the project

6. Check a component. For example, select "GPIO". The CoIDE will automatically check the
components which the checked component depend upon.

Figure 20. Check a component for the project

Rev. 1.00 17/35 �01��0����