Submenu "Read Cal.": Reading The Calibration Data - JUMO 202710/30 Operating Manual

6 Device settings
Parameter "dAtE": setting the date
Use the
Menu/parameter
Press the
press the
setting menu or
press the
measurement mode.

6.4.3 Submenu "rEAd CAL.": reading the calibration data

The reading of the calibration data is described separately, see chapter 8.1.2
"Reading the calibration data ("rEAd CAL")", page 36.
32
All manuals and user guides at all-guides.com
and keys to set the date:
Setting option
DD:MM
key to save the setting and move to the next parameter or
key to save the setting and move to the next submenu of the
key to save the setting, quit the device settings, and return to
Meaning
Days (DD) and months (MM)