Annex; Technical Data; Interfaces - JUMO variTRON 300 Installation Instructions Manual

Central processing unit
Hide thumbs Also See for variTRON 300:
Table of Contents

Advertisement

Available languages

Available languages

4

Annex

4.1

Technical data

4.1.1

Interfaces

USB host
Designation
Type
Number
Device category
Application
Data rate
Max. current
Ethernet
Designation
Type
Number
Protocol
Application
Transfer rate
Connecting cable
Cable length
RS485 (serial interface)
Designation
Type
Number
Application
Protocol
Data format
USB
A (socket)
1
Mass storage class, communications device class – Ethernet control
module (as of system version 8)
Connecting a USB flash drive or a USB to Ethernet converter (as of
system version 8)
Low Speed, Full Speed, Hi-Speed
500 mA
LAN1, LAN2
RJ45
2
TCP, IPv4, HTTP(S)
Via CODESYS as an option: Modbus TCP, PROFINET IO controller,
EtherCAT master, OPC UA server, BACnet/IP
Communication with:
- PC (setup program, web browser)
- email server
- Modbus TCP master/slave
- PROFINET IO device
- EtherCAT slave
- OPC UA client
- BACnet/IP server/client
- JUMO system bus via JUMO variTRON router modules (LAN2 only)
10 Mbit/s, 100 Mbit/s
Network cable, at least CAT5 (S/FTP)
Up to 100 m
Com
Removable terminal strip, 2-pole with PUSH IN technology
1
Fieldbus applications, communication via modem with a PC or with
an email server
Via CODESYS: Modbus RTU master/slave
8/1/n, 8/1/e, 8/1/o
4 Annex
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

705003

Table of Contents