Accessories Belt: Removal - Refitting - Renault Duster 2007 Manual

TOP AND FRONT OF ENGINE

Accessories belt: Removal - Refitting

K9K, and STANDARD HEATING RECIRCULA TION
Equipment required
offset spanner
Tightening torquesm
new accessories belt
tensioning roller bolt
WARNING
Do not run the engine without the accessories belt
to avoid damaging the crankshaft accessories pul-
ley.
WARNING
In order to avoid any refrigerant leaks, do not dam-
age (deform, twist, etc.) the pipe.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the front wheel arch side liner,
- the front right-hand wheel arch liner partially (see
Front wheel arch liner: Removal - Refitting)
(55A, Exterior protection),
- the plastic shield underneath the diesel filter.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Auto tensioner
40 N.m
a Turn the accessories belt tensioning roller clockwise
at (2) using a 16 mm offset spanner.
a Remove the accessories belt.
a Remove:
- the accessories belt tensioning roller bolt (3) ,
- the accessories belt tension wheel.
11A-2
11A
118158
135490