Fuel Temperature Sensor: Removal - Refitting - Renault Duster 2007 Manual

Fuel temperature sensor: Removal - Refitting

K9K
Equipment required
Diagnostic tool
Tightening torquesm
fuel temperature sensor
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see Diesel injection: Precautions for the
repair) .
IMPORTANT
Before carrying out any work on the injection sys-
tem, check using the Diagnostic tool :
- that the rail is not under pressure,
- that the fuel temperature is not too high.
It is essential to respect the safety and cleanliness
advice whenever work is carr ied out on this system.
Working on the circuit with the engine running is
strictly forbidden.
REMOVAL
a
Note:
Make sure you have a new diesel temperature
sensor before removal.
I - REMOVAL PREPARATION OPERATION
a Remove the front engine cover.
DIESEL INJECTION
15 N.m
13B-28
a Disconnect:
- the heater plugs (1) on cylinders 3 and 4,
- the injectors (2) of cylinders 3 and 4,
II - REMOVAL OPERATION
a Disconnect the fuel temperature sensor connector
(3) .
a Clean the fuel temperature sensor.
a Remove the fuel temperature sensor (4) .
a Plug the openings.
13B
24752
102317