ENGINE AND GEARBOX VALUES AND SETTINGS
F4R ENGINE
Accessories belt tensioning
Accessories belt tensioning
REMOVAL
Put the vehicle on a two-post lift.
Disconnect the battery.
Remove:
– the engine covers,
– the front right wheel,
– the side protection.
To remove the belt, pivot the automatic belt tensioner
in the direction shown below using a 16 mm angled
ring spanner.
Remove the accessories belt.
REFITTING
NOTE: never refit a belt once it has been removed,
but replace it.
Refitting is the reverse of removal.
Connect the battery and carry out the necessary
programming.
07A-2
07A
Edition 2