Hydraulic Unit - Master Cylinder Brake Pipe: Removal - Refitting - Renault Duster 2007 Manual

FRONT AXLE COMPONENTS

Hydraulic unit - master cylinder brake pipe: Removal - Refitting

ANTI-LOCK BRAKING SYSTEM
Equipment required
pedal press
Tightening torquesm
brake pipe unions on
the hydraulic unit
brake pipe unions on
the master cylinder
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see 31A, F ront axle components, Front
axle components: Precautions for the repair,
page 31A-1) .
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Position a pedal press on the brake pedal to limit
the outflow of brake fluid.
a Remove the front engine cover (if fitted to the vehi-
cle).
14 N.m
14 N.m
a Remove the soundproofing clips (1) (if fitted to the
vehicle).
a Move the soundproofing to one side in order to see
the pipes.
II - REMOVAL OPERATION
a Undo the brake pipe unions (2) on the hydraulic unit.
a Detach the brake pipes.
31A-19
31A
117827
117817