Renault Duster 2007 Manual page 267

Exhaust gas recirculation assembly: Removal - Refitting
K9K, and 796
a Position the (Ms. 583) or the hose clamps on the
coolant inlet and outlet hoses of the exhaust gas
cooler.
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
a Remove:
- the bolts (6) on the coolant circulation cover,
- the coolant circulation cover,
- the seals of the coolant circulation cover.
ANTIPOLLUTION
118974
14A-10
II - REMOVAL OPERATION
a Remove:
- the bolts (9) from the lifting eye at the timing end,
- the lifting eye on the timing end (10) ,
- the air inlet metal tube (11) ,
- the air inlet metal tube seals,
- the exhaust gas recirculation rigid pipe (see 14A,
Antipollution, Exhaust gas recirculation rigid
pipe: Removal - Refitting, page 14A-12) ,
- the bolts (12) of the exhaust gas assembly mount-
ing,
- the exhaust gas recirculation assembly.
a Remove the following on the workbench:
- the air duct sleeve (7) ,
- the centring ring (8) of the air filter unit.
REFITTING
I - REFITTING PREPARATION OPERATION
a On the workbench, refit:
- the air pipe sleeve (7) ,
- the centring ring of the air filter unit.
a Always replace:
- the air inlet metal tube seals,
- the coolant circulation cover seals,
- the turbocharger air outlet pipe seal.
14A
145641