Remote Headlight Beam Adjustment Actuator: Removal - Refitting - Renault Duster 2007 Manual

Remote headlight beam adjustment actuator: Removal - Refitting

Location and specifications (tightening torques, parts
always to be replaced, etc.) (see 80B, Headlights,
Headlight assembly: Exploded view, page 80B-1)
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Switch off the ignition.
a Remove:
- the front bumper (see Front bumper assembly:
Exploded view) and (see Exterior body front
trim assembly: Exploded view) (55A, Exterior
protection),
- the headlight (see 80B, Headlights, Headlight as-
sembly: Exploded view, page 80B-1)
II - REMOVAL OPERATION
a Remove the headlight beam adjustment actuator by
turning it a quarter of a turn clockwise (see 80B,
Headlights, Headlight assembly: Exploded view,
page 80B-1) .
REFITTING
REFITTING OPERATION
a Proceed in the reverse order to removal.
a Adjust the headlights (see 80B, Headlights, Head-
light: Adjustment, page 80B-3) .
HEADLIGHTS
80B-9
80B