Injector Rail: Removal - Refitting - Renault Duster 2007 Manual

Injector rail: Removal - Refitting

K9K
Equipment required
Diagnostic tool
Tightening torquesm
injector rail nuts
nuts of the neck and
dipstick guide on the
injector rail
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see Diesel injection: Precautions for the
repair) .
IMPORTANT
Before starting any work on the injection circuit, use
the Diagnostic tool to check:
- that the injector rail is not under pressure,
- that the fuel temperature is not too high.
It is essential to respect the safety and cleanliness
advice whenever work is carr ied out on this system.
Working on the circuit with the engine running is
strictly forbidden.
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove the front engine cover.
DIESEL INJECTION
28 N.m
21 N.m
13B-25
a Remove the nuts (1) from the dipstick guide and
neck.
a Put the engine oil dipstick guide to one side (2) .
13B
24733