Venturi: Removal - Refitting - Renault Duster 2007 Manual

K9K
Equipment required
Diagnostic tool
Tightening torquesm
Venturi bolt
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see Diesel injection: Precautions for the
repair) .
IMPORTANT
Before carrying out any work on the injection sys-
tem, check using the Diagnostic tool :
- that the injector rail is not under pressure,
- that the fuel temperature is not too high.
It is essential to respect the safety and cleanliness
advice whenever work is carr ied out on this system.
Working on the circuit with the engine running is
strictly forbidden.
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
Note:
Ensure that you have a new Venturi before opening
up the fuel circuit.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove the front engine cover.
DIESEL INJECTION

Venturi: Removal - Refitting

6 N.m
a Remove the dipstick guide and filler neck nuts (1) .
a Put the dipstick guide to one side (2) .
a Disconnect the diesel supply and return pipes (3) .
13B-16
13B
24733
24752