Renault Duster 2007 Manual page 568

POWER ASSISTED STEERING
Power-assisted steering pump: Removal - Refitting
K4M, and STANDARD HEATING RECIRCULATION
REFITTING
I - REFITTING PREPARATION OPERATION
a
WARNING
Do not remove the blanking plugs from each
component until the last moment.
Also, do not remove the components from their
packaging until they are to be fitted to the vehi-
cle.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the power-assisted steering pump,
- the power-assisted steering pump bolts on the mul-
tifunction support.
a Remove the plugs in the pipe openings.
a Refit:
- the high pressure pipe union on the power-assisted
steering pump,
- the high pressure pipe bracket bolt on the cylinder
block.
Note:
T orque tighten the bolts on the accessories belt
side first, then the bolt on the other side.
a Torque tighten:
- the power-assisted steering pump bolts on the
multifunction support (21 N.m),
- the high pressure pipe union on the power-as-
sisted steering pump (21 N.m),
- the high pressure pipe bracket bolt on the cylin-
der block (21 N.m).
a Connect the low pressure pipe to the power-assisted
steering pump.
a Refit the low pressure pipe clip on the power-assist-
ed steering pump using the.
a Remove the hose clamp (Ms. 583) from the low
pressure hydraulic pipe of the power-assisted steer-
ing pump.
III - FINAL OPERATION
a Refit:
- the engine undertray,
- the accessories belt (see Accessories belt: Re-
moval - Refitting) (11A, Top and front of engine),
- the front right-hand wheel (see 35A, Wheels and
tyres, Wheel: Removal - Refitting, page 35A-1) .
a Fill the power-assisted steering circuit with ELF
RENAULT MATIC D2 oil (see Vehicle: Parts and
consumables for the repair) (04B, Consumables -
Products),
a Bleed the circuit by turning the steering wheel from
lock to lock with the engine switched off at first.
a Bleed the circuit by turning the steering wheel from
lock to lock with the engine running.
a Top up the fluid in the reservoir.
a Check that there are no leaks.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
36B-11
36B