Exhaust gas recirculation solenoid valve: Removal - Refitting
K9K, and 796
Tightening torquesm
exhaust gas recircula-
tion solenoid valve bolts
Note:
The exhaust gas recirculation solenoid valve is fit-
ted into the exhaust gas recirculation unit.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove the air filter unit (see 12A, Fuel mixture,
Air filter unit: Removal - Refitting, page 12A-6) .
II - REMOVAL OPERATION
a Disconnect the connector (1) from the exhaust gas
recirculation solenoid valve.
a Remove:
- the bolts (2) from the exhaust gas recirculation so-
lenoid valve,
- the exhaust gas recirculation solenoid valve,
- the exhaust gas recirculation solenoid valve seal.
ANTIPOLLUTION
10 N.m
114508
14A-4
14A