Installation Process; Equipment Inspection; Equipment Appearance - Grandstream Networks IPVT10 Administration Manual

Installation Process

Users need to follow the steps described in the table below to correctly complete the installation of the IPVT10:
Inde
Steps
x

Equipment Inspection

1
Install to Cabinet
2
(Optional)
Connect to Network
3
Connect to the power
4
supply
Power On
5
Equipment Inspection
Users need to open the package and check the equipment and parts to ensure the integrity and availability of the equipment.

Equipment Appearance

IPVT Front Panel
N
Name Description
O.
Equipment When the equipment is not running, press the switch to turn on the equipment, and when the
1
Switch equipment is running normally, long-press the switch (5 seconds) will turn off the equipment.
2 Reboot Switch When the equipment is running normally, pressing this switch will reboot the equipment.
Figure 1: IPVT10 Package Content
Open the package, check the equipment and accessories, and inspect the hardware
Install IPVT10 to the cabinet
Connect to the network with the Ethernet cable.
Connect to the power supply with the power adapter.
Inspect the running status of the equipment.
Table 3: IPVT10 Installation Process
Figure 2: IPVT10 Front Panel
Instructions
structure of the IPVT10.