Scenario 3: External Users To Internal Server - Grandstream Networks IPVT10 Administration Manual

Figure 53: Network Deployment Diagram – External
Figure 54: Configure External Network Adapter

Scenario 3: External Users to Internal Server

The server is deployed on the internal network for external users. The users need to use the service via the public network. In
this case, users need to configure the external network IP address and static NAT in the server. If the server is deployed on the
internal network, and all participants need to use the service via a public network, users need to configure the static NAT to
ensure that certain public networks can access the server. Users could configure the External Network Adapter and NAT to
complete the configuration. This deployment does not support users to access the server directly via the internal network.
Otherwise, it may cause abnormal issues for the conferences.