Configure Service Nat Interfaces - Grandstream Networks IPVT10 Administration Manual

Destination IP This is used to configure the destination IP address for the network. This option must be configured
Address with the Subnet Mask option.
Subnet Mask This is used to configure the subnet mask.
Gateway This is used to configure the gateway of the destination network.
Network Adapter This is used to select the server network adapter for the destination network.
8. (Optional) If users set the domain name as the in the IPVT10, users could also set "Use Custom Certificate" like the
screenshot shown below:
Note
This certificate is the server signaling certificate and Web access certificate for the server.
9. Continue to fill in the other configuration options. For the first deployment, users must fill in all required fields.
10. User could click to save the configuration and click on "Apply Now" to apply the entire configurations of this page to the
server. When the deployment is complete, it will take effect immediately.
Note
When the deployment is complete, users need to check whether all network interfaces of the server are all connected. For a
single network, only one network interface needs to be connected to the network (Internal Network – Network Interface 1,
External Network – Network Interface 2).
If users modify the IP address of the server during the conferences, it may cause abnormal issues for the ongoing
conferences, and the scheduled conferences will be inaccessible.
When users modify the parameters of the server, the server will restart the service automatically.

Configure Service NAT Interfaces

To use the IPVT10 service on the enterprise's private network, users could customize the service port. The default service ports
are shown below:
Table 13: Configure Network Routing Rules
Figure 19: Use Custom Certificate