Forgot Password - Grandstream Networks IPVT10 Administration Manual

3. Input "Original Password", "New Password", and "Confirm New Password".
4. Click to save the configuration, and the system will prompt you to save successfully. If the original password is incorrect, or
the new password format is incorrect, the corresponding error will be prompted.
Important
The password must contain two of the numbers, lowercase letters, uppercase letters, and special characters, and the length is
limited to 8-16 characters.

Forgot Password

If users forgot the login password of IPVT10, users could reset the login password to the default password.
1. Connect your PC to the Ethernet port 1 of the IPVT10 server directly or change the IP address of your PC to the same
network segment as the IPVT10 server (192.168.88.xx), users could access the IPVT10 Web UI directly.
2. Use the browser on your PC to access address "192.168.88.88/iforget" to open the login password reset page, as the
screenshot shows below:
3. Users need to input the MAC address of the IPVT10 server and serial number on the login password reset page.
4. Click on "Reset", and the login password will be reset to the default login password:
If there is no sticker on the device with the random default password, the default password of the device is "change_me".
If there is a sticker on the device with the random default password, please use the password on the sticker as the default
login password.
Figure 10: Modify Password
Figure 11: Reset Password