MAGSYS IGM11 Operating Instructions Manual page 76

9.8.7.4 :SERI:COMA:MODE[?]
Description:
Mode:
Parameter:
Response:
*RST
Example:
9.8.7.5 :IP:IP1[?] .. :IP:IP4[?]
Description:
Mode:
Parameter:
Response:
*RST
Example:
9.8.7.6 :IP:MAS1[?] .. :IP:MAS4[?]
Description:
Mode:
Parameter:
Response:
*RST
Example:
Page 76 / 92
Set or query the operating mode of the EIA-232 interface.
Command or query
{SCPI|SHOR|FLOW}
like parameter
Value: not relevant
send :SERI:COMA:MODE SCPI<LF>
send :SERI:COMA:MODE?<LF>
receive SCPI<CR><LF>
Set or query the IP address of the LAN interface
IP1 is the most significant part of the IP address.
The whole address has the following structure:
IP1.IP2.IP3.IP4
Command or query
{<Value>} within the range of 0..255
like parameter
Value: not relevant
send :IP:IP1 12<LF>
send :IP:IP1?<LF>
receive 12<CR><LF>
Set or query the IP sub net mask of the LAN interface.
MAS1 is the most significant part of the IP subnet mask.
The whole address has the following structure:
MAS1.MAS2.MAS3.MAS4
Command or query
{<Value>} within the range of 0..255
like parameter
Value: not relevant
send :IP:MAS1 255<LF>
send :IP:MAS1?<LF>
receive 255<CR><LF>
Gaussmeter IGM11 Operating Instructions
Chapter 9 Serial Interfaces