MAGSYS IGM11 Operating Instructions Manual page 62

9.8.1.7 *OPC
Description:
Mode:
Parameter:
Response:
*RST
Example:
9.8.1.8 *SRE[?]
Description:
Mode:
Parameter:
Response:
*RST
Example:
9.8.1.9 *STB?
Description:
Mode:
Parameter:
Response:
*RST
Example:
Page 62 / 92
Operation Complete Command)
Set the bit "Operation complete" (bit 0) in the standard event register
after the command has been completed.
Command
none
none
Value: not relevant
send *OPC<LF>
Service Request Enable Query
Set or query the status release register. The gaussmeter returns the bit
pattern as a decimal value.
Command and query
{<Value>} within the range of 0..255
Status release register
Value: not relevant
send *SRE 22<LF>
send *SRE?<LF>
receive 41<CR><LF>
Read Status Byte Query
Query the status register.
Query
none
Status register
Value: not relevant
send *STB?<LF>
receive 0<CR><LF>
Gaussmeter IGM11 Operating Instructions
Chapter 9 Serial Interfaces