Multi Roi Function; Multi Roi Setting Parameters - JAI GO-5000M-USB User Manual

8.9

Multi ROI function

In the GO-5000-USB, the width and height of 5 separate ROIs within the full image area can be set as
required. Each image can be overlapped. The location of each ROI can also be set as required. Each Multi
ROI data is output as an independent frame.
The multi ROI mode is enabled if [Video Sending Mode] is set to "Multi ROI".
Table-25 Multi ROI Index table default values
Multi ROI
Index Selector
- Index 1
- Index 2
- Index 3
- Index 4
- Index 5
8.9.1

Multi ROI setting parameters

Table-26 Multi ROI command
Command
Multi ROI Index
Multi ROI Width
Multi ROI Height
Multi ROI Offset X
Multi ROI Offset Y
Multi ROI Index Max
Note 1: If the binning mode is used, the maximum values are adjusted accordingly.
Note 2: Only for GO-5000M-USB
Note 3: Only for GO-5000C-USB
GO-5000M-USB / GO-5000C-USB
Multi ROI
Width
2560
2560
2560
2560
2560
Parameter
Index 1～5
16～2560 (Note 1)
1～2048 (Note 1, Note2)
2～2048 (Note 3)
0～2560(Note 1) - [Sequence
ROI Width]
0～2048 (Note 1) - [Sequence
ROI Height]
1～5
- 48 -
Offset
Height
X
2048 0
2048 0
2048 0
2048 0
2048 0
Select the index to be
configured.
<Set to each Index>
Set the width value.
<Set to each Index>
Set the Height value.
<Set to each Index>
Set the Offset X value.
<Set to each Index>
Set the Offset Y value.
Set the number of index to be
used.
Y
0
0
0
0
0
Description