Installing An Ac Sensor Unit - Fujitsu ETERNUS AF Series Configuration Manual

2. Installation
Installing in a Rack

Installing an AC Sensor Unit

This section describes how to install an AC sensor unit in a rack.
Install the AC sensor unit in the same rack as the server UPS unit. When installing the AC sensor unit, the length
of the power cord (for AC sensor) that connects the AC sensor unit and the server UPS unit must be taken into
consideration.
■ Checking the package contents of the rack mount kit
Check the following package contents to confirm that there are no missing parts. If there are missing parts, con-
tact your sales representative.
❏ Shelf plate: 1
❏ M4 cross recessed head screw
with captive washer: 2
❏ M6 cross recessed head screw
with captive washer: 4
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide (Power Synchronized Unit)
❏ M3 cross recessed head screw
with captive washer: 4
❏ Blank panel: 1
38
Copyright 2019 FUJITSU LIMITED
❏ L-shaped bracket: 2
Same for right and left.
❏ M6 cage nut: 4
Used when the holes in the rack
pillars are square
P3AM-8012-14ENZ0