Fujitsu ETERNUS AF Series Configuration Manual page 65

5. Adding a Connecting Device
Connection Procedure When Adding an ETERNUS DX/AF
Power synchronized unit
Power synchronization starts when the connection is complete. Check that power synchronization performs nor-
mally.
■ Adding five or more ETERNUS DX/AF storage systems
To add five or more ETERNUS DX/AF storage systems, cascade the power synchronized units by adding another
power synchronized unit.
The procedure is described below.
Procedure
1
Set the required settings for power synchronization of the ETERNUS DX/AF storage systems that
are to be added.
For details about the ETERNUS DX/AF settings, refer to
2
Install the power synchronized unit that is to be added in the rack.
For details about how to install a power synchronized unit, refer to
(page 35).
3
Turn on the added power synchronized unit.
For details about how to turn on a power synchronized unit, refer to
Unit" (page
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide (Power Synchronized Unit)
UPS unit for
Server#0
PWC#0 PWC#1 PWC#2 PWC#3
RS232C cable
(provided with a
power synchronized unit)
RS232C cables
(optional)
48).
Copyright 2019 FUJITSU LIMITED
Server#0 Server#1
ETERNUS DX/AF #0
PWC
Added ETERNUS DX/AF
ETERNUS DX/AF #1
PWC
Added ETERNUS DX/AF
ETERNUS DX/AF #2
PWC
Added ETERNUS DX/AF
ETERNUS DX/AF #3
PWC
"Setting the ETERNUS DX/AF" (page
"Installing a Power Synchronized Unit"
65
UPS unit for
Server#1
End of procedure
44).
"Turning on the Power Synchronized
P3AM-8012-14ENZ0