4.
Connection and Settings
Turning on the Power Synchronized Unit
CAUTION
■ Procedure for powering on
The procedure for turning on a power synchronized unit is described below.
Procedure
1
Connect the power cord (for AC power input) to the power synchronized unit.
1-1
Connect the power plug of the power cord (for AC power input) to the AC IN port.
1-2
Attach the release tie to the plug of the power cord (for AC power input) to firmly fix the power plug to
ensure it does not become unplugged.
Release tie
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide (Power Synchronized Unit)
Unplug
•
Use a dry cloth to remove all dust from plugs and power sockets. Not doing so may
cause electric shock or fire.
Ground
•
Use only power sockets that have a ground. Failure to do so may cause electric
shock, fire, or malfunction.
Power cord (for AC power input)
AC IN port
Copyright 2019 FUJITSU LIMITED
49
P3AM-8012-14ENZ0