Power Distribution Units (Only For Regions Other Than The Emeia, North American, Central American, And Caribbean Regions); Figure 6.12 Power Distribution Unit (Ac200-240V, 1U, 4 Outlets); Table 6.10 Power Distribution Unit (Ac200-240V, 1U, 4 Outlets) And Provided Ac Cable Specifications - Fujitsu ETERNUS DX500 S3 Overview

Chapter 6 Hardware Configurations
6.3

Power Distribution Units (Only for Regions other than the EMEIA, North American, Central American, and Caribbean Regions)

6.3 Power Distribution Units (Only for Regions other than the
EMEIA, North American, Central American, and Caribbean
Regions)
There are two sizes for power distribution units: 1U and 2U.
A power distribution unit is an option to connect power supply units to power outlets when power sockets are
limited.
■
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
There are four outlets and two inlets.

Figure 6.12 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)

1. Inlet (INPUT)
2. Outlet (OUTPUT)
The specifications of a power distribution unit and the AC cables that are provided are shown below.

Table 6.10 Power Distribution Unit (AC200-240V, 1U, 4 Outlets) and Provided AC Cable Specifications

Item
Power
Input cable
1
Voltage
Phase
Frequency
Connection type
Length
Quantity
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Overview
Copyright 2015 FUJITSU LIMITED
2
83
Specifications
AC 200 – 240V
Single
50Hz/60Hz
IEC60320 C13 n NEMA L6-15P
4m
2
P3AM-7702-14ENZ0