Operator's (Ops) Panel Leds; Unit Identification Number; Software/Ses; Disk Drive Leds - Seagate RealStor 5005 Series Hardware Installation

Hide thumbs Also See for RealStor 5005 Series:
Table of Contents

Advertisement

Operator's (Ops) panel LEDs

Figure 40 (page 55)
Table 13 (page 58)
Ops panel LEDs
System Power
Module Fault
Identity
Figure 40 LEDs: Ops panel – enclosure front panel

Unit Identification Number

The Unit Identification Display (UID) is a dual seven segment display that is used to provide feedback to the user. Its
primary purpose is to display an Enclosure UID number to assist in setting up, monitoring, and managing storage systems
comprised of multiple enclosures.
The UID is stored in the enclosure VPD and is used by management interfaces (CLI and the SMC). The UID can drive all
seven of the segments, plus the dot/decimal point in each character of the display.

Software/SES

The enclosure UID number can be read and set through the management interfaces and SES.

Disk Drive LEDs

Each disk drive module includes two LEDs (green and amber) as shown in
In normal operation, the green LED will be on and will blink as the drive operates.
In normal operation, the amber LED state will be:
Off if a disk is not present
Off as the disk successfully operates
On if there is a disk fault

Accessing the SMC

Upon completing the hardware installation, you can access the controller module's web-based management
interface—Storage Management Console (SMC)—to configure, monitor, and manage the storage system. Invoke your
web browser and enter the IP address of the controller module's network port in the address field, then press Enter. To
sign-in to the SMC, use the default user name manage and password !manage. If the default user name or password—or
provides an illustration showing the Ops panel layout and a table describing LED behavior. See
for details pertaining to fault indications.
System Power
Module Fault
Identity
LED display
Behavior
Constant green: good or positive indication
Constant amber: fault condition present
Constant amber or blinking amber: fault condition present
See
Figure 16 (page 24)
"Disk drive carrier module LEDs" (page
Operator's (Ops) panel LEDs
59).
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Realstor 4005 series

Table of Contents