Removing a SFF drive carrier module
The removal/replacement procedure for SFF drive carrier modules is basically the same as for LFF models, except that
the SFF carriers are mounted vertically.
1. Press the latch in the carrier handle downward to release the carrier handle so that it can revolve outward as shown below.
Figure 51 Removing a SFF disk drive module (1 of 2)
2. Gently move the drive carrier module outward from the drive slot.
Figure 52 Removing a SFF disk drive module (2 of 2)
3. Remove the module fully from the drive slot.
CAUTION: To ensure optimal cooling throughout the enclosure, dummy drive carrier modules must be fitted to all
unused drive slots. See also
84
Module removal and replacement
1
Figure 26 (page
34).
2