Installing a LFF drive carrier module
CAUTION: A drive carrier module cannot be installed if its anti-tamper lock is activated outside the enclosure. See
step 1
of the procedure described on
1. Release the drive carrier handle by depressing the latch in the handle.
Figure 47 LFF drive carrier module in open position
2. Insert the drive carrier module into the enclosure. Make sure that the drive carrier is positioned such that the top of
the disk is facing up, and the handle opens from the left as you face the enclosure front panel.
Figure 48 Installing a LFF drive carrier module (1 of 2)
3. Slide the drive carrier fully into the enclosure.
82
Module removal and replacement
page
83.