Removing A Lff Drive Carrier Module; Removing A Lff Disk Drive Module (1 Of 2); Removing A Lff Disk Drive Module (2 Of 2) - Seagate RealStor 5005 Series Hardware Installation

Removing a LFF drive carrier module

1. Press the latch in the carrier handle towards the handle hinge to release the carrier handle as shown below.
1
2
Figure 45 Removing a LFF disk drive module (1 of 2)
2. Gently move the drive carrier module approximately 25 mm (1-inch), then wait 30 seconds.
Figure 46 Removing a LFF disk drive module (2 of 2)
3. Remove the module fully from the drive slot.
CAUTION: To ensure optimal cooling throughout the enclosure, dummy drive carrier modules must be fitted to all
unused drive slots. See also Figure 26 (page 34).
Replacing a drive carrier module 81