www.seagate.com
Chapter 3: Characteristics
This chapter presents characteristics for each Nytro XP6300 card.
3.1
Nytro XP6300 Card Characteristics
The Nytro XP6300 card uses a low-profile, half-height, and half-length PCIe board.
The Nytro XP6300card uses a SAS2308 controller with drive firmware that runs on its internal processor. The Nytro
XP6300 card can be used for either persistent or nonpersistent data and offers high-performance with low latency and
a low CPU burden.
The following figure shows the Nytro XP6300 card.
Figure 5 Nytro XP6300 Card
3.1.1
LEDs
Two board-mounted, right-angle LEDs shine through holes in the PCI bracket: one is for drive life and one is for drive
status. The LEDs are labeled on the bracket.
3.1.2
Troubleshooting the Nytro XP6300 Card
The LEDs provide key status information to diagnose any problem with the Nytro XP6300 card. You can also contact
Technical Support
Seagate Nytro XP6300 Flash Accelerator Cards User Guide, Rev. A
The following figure shows the LED layout.
.
Nytro XP6300 Card Characteristics
13