Nexcom VTC 7260 User Manual page 22

Chapter 1: Product Introduction
CAN Bus
▪ 1 x CAN 2.0A/ 2.0B
▪ IEC 61000-4-2 Electrostatic Discharge (ESD): ± 8KV/15KV (contact/air)
▪ 2.5KV isolated
GNSS
▪
U-blox NEO-M9N GNSS module for GPS/GLONESS/QZSS/Galileo/Beidou
▪ Optional DR (Dead Reckoning) function, NEO-M8U/M8L
Power Supply
▪ Nominal voltage: 9~36V
▪ Cranking voltage: 6V~9V (less than 20 sec)
▪ OCP & UVP (shut down once exceeding 37V)
▪ Ignition on/off control & programmable on/off delay timer
▪ Optional for remote power on/off control
I/O ports, Front-plate
▪ ATX power button, Reset button
▪ 9 x LED Indicators, 1 x VGA (DB15), 2 x COM (DB9, RS232/422/485), 1 x
Multi-port (DB15, 4xDI, 4xDO, CAN, DR signal) , 1 x Ext. (DB15, reserved),
1 x PR-SMA for GNSS, 4 x SMA for WWAN
I/O ports, Rear-plate
▪ 2 x Audio jack (Line-out & MIC-in)
▪ 3 x USB 3.2 type A, 1 x USB 2.0 type A
▪ 1 x HDMI, 1 x DP, 4 x PoE+ (2.5GbE, RJ45), 1 x GbE, 9~36VDC (3-pin
Phoenix), 4 x PR-SMA for WLAN
I/O ports, side-plate
▪ 2 x SIM slots (SIM1-1, SIM2-1)
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Dimensions & Weight
▪ 210.0mm x 173.0mm x 75.0mm (w/o mount brackets)
▪ 234.0mm x 173.0mm x 81.0mm (w/ mount brackets)
▪ Weight: 3.5kg
Environment
▪ Operating temperatures: -40°C~70°C (12W TDP base)
▪ Storage temperatures: -40°C~85°C
▪ Relative humidity: 10%~95% (non-condensing)
Vibration & Shock
▪ Vibration in operating:
- MIL-STD-810H, 514.8C Procedure 6, Category 4
- IEC 60068-2-64: 2.0g@5~500Hz
▪ Vibration in storage:
- MIL-STD-810G, 514.6E Procedure 1, Category 24, 7.7g
▪ Shock:
- MIL-STD-810G, 516.6 Procedure I, trucks and semi-trailers=40g
- Crash hazard: Procedure V, ground equipment=75g
Certifications
▪ CE approval, FCC Class A, UKCA, E13 Certified
Operating System
▪ Windows 10 64-bit/Windows 10 IOT 64-bit, Windows 11
▪ Linux (Ubuntu 18.04)
External Cable
▪ DB15 multi-port adapter cable, 20cm
8
VTC 7260 Series User Manual