Table of Contents
Advertisement
Installing a GPU
IMPORTANT:
• A GPU support bracket and three screws are shipped with a riser module. Keep them secure
before installing a GPU.
• Use the GPU support bracket and screws provided with the riser module to install a GPU in the
riser module. The GPU support bracket and screws provided with a GPU might not fit the riser
module structure.
To install a GPU:
1.
Wear an ESD wrist strap and make sure the strap makes good skin contact and is reliably
grounded.
2.
Power off the device.
3.
Attach the GPU support bracket to the GPU. Align the three screw holes in the GPU support
bracket with the installation holes in the GPU, and then use screws to attach the GPU support
bracket to the GPU.
Figure7-10 Attaching the GPU support bracket to the GPU
4.
Remove the module blank from the riser module. Use a Phillips screwdriver to loosen the
screw on the module blank and then pull the module blank slowly out of the riser module.
Figure7-11 Removing the module blank from the riser module
5.
Install the GPU in the riser module and connect the GPU power cord:
16
Advertisement
Table of Contents
