Table of Contents
Advertisement
4.
Insert the golden plating end of the M.2 SSD drive slowly into the M.2 slot at an angle.
5.
Slightly press the other end of the golden plating until the golden plating of the M.2 SSD drive
is in close contact with the connector in the M.2 slot.
6.
Use a Phillips screwdriver to screw the M.2 SSD drive into place.
Figure7-14 Installing an M.2 SSD drive
7.
Install the access panel. For more information, see
8
Installing external removable
components
CAUTION:
• Install a module or filler panel in each slot. Make sure no slot is empty during the device
operation.
• Do not hold the handle of a power supply or of a module to move the device. Doing so might
cause device damage.
No FIP modules, MIC-X interface cards, SATA drives, or power supplies are provided with the
device. Purchase them yourself as required.
"Installing a storage
19
controller."
Advertisement
Table of Contents
