Table of Contents
Advertisement
9.
Install the riser module installed with the storage controller in the device:
a. Align the front tabs of the riser module with the guide rails on the system board and align
the captive screw with the screw hole on the system board.
b. Align the golden plating of the riser module with the PCIe riser connector on the main board,
and insert the riser module vertically onto the system board.
c. Fasten the captive screws to secure the riser module to the system board.
Figure7-7 Installing the riser module in the device
10. Fasten the screws with a Phillips screwdriver to secure the riser module to the chassis.
14
Advertisement
Table of Contents
