Installing The Communications Cables; M2000 Management; Neteco Management - Huawei TP48120A-HD15A1 Installation Manual

TP48120A-HD15A1 & TP48120A-HD15A2 &
TP48200A-HD15A1 & TP48200A-HD15A2
Installation Guide
----End

7.2 Installing the Communications Cables

7.2.1 M2000 Management

Procedure
Step 1 Connect one end of a network cable to the RS485/RS232 port on the SMU.
Step 2 Connect the other end to the Mon1 port on the baseband unit (BBU), as shown in
Figure 7-2 Installing a communications cable
(1) RS485/RS232 port on the SMU
----End

7.2.2 NetEco Management

Networking Mode 1: over BBU
Step 1 Connect one end of a network cable to the RS485/RS232 port on the SMU.
Step 2 Connect the other end to the Mon1 port on the baseband unit (BBU), as shown in
Issue 03 (2014-12-02) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) BBU (3) Mon1 port on the BBU
7 Installing Cables
Figure 7-2.
Figure 7-3.
47