Servicing the ZS5-4 Controller
Be sure to read sections
"Prerequisites for Servicing Hardware" on page
Most hardware faults clear after replacing the affected component. If a fault does not self-clear,
see
"Repairing Active Problems" on page
To replace ZS5-4 hardware components, use the following tasks:
"Replacing a ZS5-4 HDD" on page 57
■
"Replacing a ZS5-4 Fan Module" on page 59
■
"Replacing a ZS5-4 Power Supply" on page 63
■
"Replacing a ZS5-4 DIMM" on page 66
■
"Replacing a ZS5-4 Memory Riser Card" on page 69
■
"Replacing or Adding a ZS5-4 PCIe Card" on page 72
■
"Replacing a ZS5-4 System Battery" on page 78
■
To understand the ZS5-4 controller, use the following topics:
"ZS5-4 Configuration Options" on page 82
■
"ZS5-4 Front and Rear Panel Components" on page 83
■
"ZS5-4 Specifications" on page 87
■
"ZS5-4 Internal Components" on page 88
■
"ZS5-4 CPUs and Memory Riser Card" on page 96
■
"ZS5-4 PCIe Slots" on page 100
■
"ZS5-4 Attached Storage" on page 101
■
Replacing a ZS5-4 HDD
HDDs are hot-swappable and can be removed and installed while the storage controller is
running without affecting other hardware capabilities. Use the following procedure to replace a
ZS5-4 HDD. For information on disk compatibility, see the
"Getting Started with Servicing the Hardware" on page 17
51.
39.
and
Oracle Systems
Handbook.
Servicing the ZS5-4 Controller
57
Need help?
Do you have a question about the ZS3 Series and is the answer not in the manual?