Oracle ZS3 Series Owner's Manual page 154

Replacing a ZS4-4 Memory Riser Card
up and out of the controller. The handles act as levers against the sidewalls to
extract the card connector from the connector on the motherboard.
On the replacement memory riser card, ensure that all populated and
6.
unpopulated DIMM slot ejector levers are in the closed and locked position.
Caution -
card. All populated and unpopulated DIMM slot ejector levers on the memory riser card must
be in the fully closed and locked position before installing the card in the controller.
7. In the controller, ensure that the memory riser card ejector levers are in the
closed position.
154 Oracle ZFS Storage Appliance Customer Service Manual • December 2016
Open DIMM ejector levers can break off during the installation of the memory riser