Shimadzu IonFocus Instruction Manual page 6

Introduction
n Inspection and Maintenance
n Hazards Involved in Repair, Disassembly, or Modification
iv
™
IonFocus Unit
Never remove the cover from the instrument.
This may cause injury or damage the instrument.
The cover does not need to be removed for routine maintenance or inspection.
Repairs inside the product must be performed by Shimadzu service personnel.
Contact your Shimadzu representative.
Do NOT disassemble or modify the product without permission.
Otherwise, you may receive an electric shock or a short circuit may occur.
Personal injury or product damage can also result.
Use the specified parts only.
Replacement parts must be of the specifications given in "Component Parts"
or "Maintenance Parts". Use of any other parts may result in malfunction in
the instrument.
Do NOT leave the instrument in wet condition nor use alcohol or thinner
solvents for cleaning the instrument.
Doing so could cause rust formation or discoloration.
To clean the instrument, wipe it with a soft cloth moistened with a small
amount of water or neutral detergent, and then wipe it with a soft dry cloth.
Do NOT dispose of waste liquids illegally.
Dispose of the waste liquid properly in accordance with the regulations and
instructions issued by your administrative department.
Turn the instrument's high voltage or power switch OFF before inspection,
maintenance or part replacement.
Otherwise, electric shock or short-circuit accidents could occur.
Do NOT disassemble or modify the product without permission.
Otherwise, you may receive an electric shock or a short circuit may occur.
Personal injury or product damage can also result.
Contact your Shimadzu representative for repair inquiries.
Unauthorized repairs may cause a fire, electric shock, or injury.