Table of Contents
Advertisement
Driver assistance system
3D view function
3D view function shows the vehicle in
various angles. Press the 3D view icon
on the Surround View Monitor screen to
choose the angle. Press the 3D view icon
again to reset the angle.
Operating conditions
3D view function will turn on when the
following conditions are satisfied:
僅 Shifting to P (Park), N (Neutral) or D
(Drive) and the vehicle speed is below
6 mph (10 km/h).
僅 When shifting to R (Reverse) and Sur-
round View Monitor is on, Press 3D
view icon on the Surround View Moni-
tor screen.
Off conditions
3D view function will turn off when the
following conditions are satisfied:
僅 Vehicle in P (Park), N (Neutral) or D
(Drive)
- Shifting to P (Park)
- Pressing the Parking/View button
(1)
- Pressing the infotainment screen
button (3)
- Pressing the home button on the
Surround View Monitor screen (2)
- Vehicle speed is above 6 mph (10
km/h)
僅 Vehicle in R (Reverse)
- Shifting to P (Park)
NOTICE
3D view function does not display the
parking guide.
6
96
Surround View Monitor (SVM)
Surround View Monitor malfunc-
tion and limitations
Surround View Monitor malfunc-
tion
When Surround View Monitor is not
working properly, or the screen flickers,
or the camera image does not display
normally, have the vehicle inspected by
an authorized Kia dealer.
Limitations of Surround View
Monitor
僅 The screen may be displayed abnor-
mally, and an icon will appear at the
top left side of the screen under the
following circumstances:
- The liftgate is opened.
- The driver or front passenger door
is opened.
- The outside rear view mirror is
folded.
WARNING
僅 ALWAYS look around your vehicle to
make sure there are no objects or
obstacles before moving the vehicle.
What you see on the screen may dif-
fer from the actual vehicle's location.
僅 The image shown on the screen may
differ from the actual distance of the
object. Make sure to directly check the
vehicle's surroundings for safety.
僅 Surround View Monitor is designed to
be used on a flat surface. Therefore, if
used on roads with different heights
such as curbs and speed bumps, the
image in the screen my not look cor-
rect.
僅 If the camera lens is covered with for-
eign material, the Surround View
Monitor may not operate normally.
Always keep the camera lens clean.
However, do not use chemical sol-
Advertisement
Chapters
Table of Contents
