Kia Telluride 2023 Owner's Manual page 204

Features of your vehicle
僅 After a few minutes of engine warm
up, turn on or set the fan to a higher
level and adjust the temperature set-
ting to hot.
Adjusting the driver and passen-
ger side temperature, fan speed
and air flow direction equally
OON042320
1. Press the "SYNC" button to adjust the
driver and front/rear passenger side
temperature, fan speed and air flow
direction equally.
The front and rear passenger side
temperature, fan speed and air flow
direction will be set to the same tem-
perature, fan speed and air flow direc-
tion as the driver's side.
2. Turn the driver side temperature con-
trol knob. The driver and front/rear
passenger side temperature will be
adjusted equally.
Press the fan speed control button.
The driver and front/rear passenger
side fan speed will be adjusted
equally.
Press the driver side mode selection
button. The driver and front/rear pas-
senger side air flow will be adjusted
equally.
3. When the rear climate control is
turned ON, the fan speed and air flow
direction will automatically follow the
first row setting.
4 124
Automatic climate control system
Adjusting the driver and passen-
ger side temperature, fan speed
and air flow direction individually
僅 Press the "SYNC" button again to
adjust the driver and front/rear pas-
senger side temperature, fan speed
and air flow direction individually.
Changing temperature scale
僅 To change the temperature display
from Fahrenheit to Celsius and vice
versa, press the OFF button, while
pressing the AUTO button for 3 sec-
onds or more.
The display will change from Centigrade
to Fahrenheit, or from Fahrenheit to
Centigrade. If the battery has been dis-
charged or disconnected, the tempera-
ture mode display will reset to
Fahrenheit.
Controlling air intake
This is used to select the outside (fresh)
air position or recirculated air position.
OON042321
To change the air intake control position:
僅 Push the desired control button.
Outside (fresh) air position
With the outside (fresh) air
position selected, air enters
the vehicle from outside and
is heated or cooled according
to the function selected.