僅 Replacing Stop Lamp, Tail Lamp, And Rear Turn Signal Lamp (Bulb Type) (Rear Combination Lamp Type A); Type A); 僅 Replacing High Mounted Stop Lamp (Led Type) - Kia Telluride 2023 Owner's Manual

Maintenance
Replacing stop lamp, tail lamp,
and rear turn signal lamp (Bulb
type) (Rear combination lamp

Type A)

OON072054
1. Open the liftgate.
2. Loosen the lamp assembly retaining
screws with a screwdriver.
3. Remove the rear combination lamp
assembly from the body of the vehi-
cle.
4. Remove the socket from the assembly
by turning the socket counterclock-
wise until the tabs on the socket align
with the slots on the assembly.
5. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket.
6. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
7. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly and turning
the socket clockwise.
8. Reinstall the lamp assembly to the
body of the vehicle.
Replacing back up lamp (Bulb
type) (Rear combination lamp
Type A)
OON072070
If the Back Up lamp bulb (Bulb Type) (1)
does not operate, have your vehicle
checked by an authorized Kia dealer.
Replacing high mounted stop
lamp (LED type)
If the High Mounted Stop Lamp (LED) (1),
does not operate, have the vehicle
checked by an authorized Kia dealer.
OON078046NR
The LED lamps cannot be replaced as a
single component because it is an inte-
grated unit. The LED lamps have to be
replaced with the unit.
A skilled technician should check or
repair the High Mounted Stop Lamp
(LED), for it may damage related parts of
the vehicle.
Light bulbs
8
8 55