Kia Telluride 2023 Owner's Manual page 143

Features of your vehicle
reflection from the surface of the
mirror.
- As the range of the image display
by the Digital Center Mirror is dif-
ferent from that of the optical mir-
ror, make sure to check.
僅 If the Digital Center Mirror malfunc-
tion, immediately switch the system to
the conventional rearview mirror
mode.
僅 When strong light (for example, sun-
light or high beams from following
vehicles) enters the camera, a light
beam or a glaring light may appear on
the monitor screen of the Digital Cen-
ter Mirror. In that case, switch the sys-
tem to the conventional rearview
mirror mode appropriately.
僅 If the camera lens (1) is dirty, the dis-
played image may not be clear. In this
case, clean it with a soft cloth damp-
ened with water or a swab.
OON042509
System component
OON042510
1. Icon display area
Displays icons, adjusting Brightness &
Tilt
2. Lever
Operate to change between digital
mirror mode and optical mirror mode.
3. Menu button
Press to display the icon display area
and select the item you want to adjust
(Brightness & Tilt).
4. Select/adjust button
Press to change the setting of the
item you want to adjust.
5. Camera indicator
Indicates that the camera is operating
normally.
6. HomeLink buttons
For the operation of the "HomeLink씾
Universal Transceiver".
How to change the mode
The mode can be switched when the
switch is in the ON position.
OON042511_2
1. Pull the mode select lever to all the
way switch to the Digital Center Mirror
mode (camera view mode).
* Displays an image of the area behind
the vehicle. In this mode, camera
indicator (6) is shown.
2. Push the mode select lever to all the
way switch to the optical inside rear-
view mirror mode.
* Turns off the display of the Digital
Center Mirror allows it to be used as
an optical mirror.
Mirrors
4
4 63