Idle Stop And Go (Isg) System - Kia Telluride 2023 Owner's Manual

Hide thumbs Also See for Telluride 2023:
Table of Contents

Advertisement

Driving your vehicle
僅 Under some conditions your parking
brake can freeze in the engaged posi-
tion. This is most likely to happen
when there is an accumulation of
snow or ice around or near the rear
brakes or if the brakes are wet. If
there is a risk that the parking brake
may freeze, apply it only temporarily
while you put the shifter lever in P and
block the rear wheels so the vehicle
cannot roll. Then release the parking
brake.
僅 Do not hold the vehicle on an incline
with the accelerator pedal. This can
cause the transmission to overheat.
Always use the brake pedal or parking
brake.

Idle Stop and Go (ISG) system

Idle Stop and Go (ISG) system
The Idle Stop and Go (ISG) system
reduces fuel consumption by automati-
cally shutting down the engine when the
vehicle is at a standstill. (For example:
red light, stop sign and traffic jam)
The engine starts automatically as soon
as the starting conditions are met.
The ISG is ON whenever the engine is
running.
NOTICE
When the engine automatically starts by
the ISG system, some warning lights
(ABS, ESC, ESC OFF, EPS or Parking
brake warning light) may turn on for a
few seconds.
This happens because of low battery
voltage. It does not mean the system has
malfunctioned.
Auto stop
If you depress the brake pedal and the
vehicle comes to a stop with the ISG ON,
the engine will stop automatically.
Stop the vehicle completely by pressing
the brake pedal when the shift lever is in
the D (Drive) or N (Neutral) position.
OON052218
The engine will stop and the green
AUTO STOP (
) indicator on the
instrument cluster will appear.
5
5
35

Advertisement

Table of Contents
loading

Table of Contents