Kia Telluride 2023 Owner's Manual page 329

Driver assistance system
With the vehicle detection state, Collision
warning will alert the driver when the
turn signal is activated to make a lane
change with an adjacent car in the blind
spot area.
僅 Collision warning will alert the driver
with the warning light on the outside
rear view mirrors (side view mirrors)
and head-up display (if equipped), an
audible warning, and steering wheel
vibration.
僅 When the turn signal is turned off or
you move away from the lane, the col-
lision warning will be canceled and
the function will return to Vehicle
detection state.
WARNING
僅 The detecting range of the front cor-
ner radar or rear corner radar is deter-
mined by a standard road width,
therefore, on a narrow road, Blind-
Spot Collision-Avoidance Warning
may detect other vehicles two lanes
over and warn you. In contrast, on a
wide road, Blind-Spot Collision-
Avoidance Warning may not be able
to detect a vehicle driving in the next
lane and may not warn you.
僅 When the hazard warning flasher is
on, the collision warning by the turn
signal will not operate.
Blind-Spot Collision-Avoidance Warning (BCW)
NOTICE
Images or colors may be displayed dif-
ferently depends on the instrument clus-
ter specifications or theme.
Collision-avoidance assist (Paral-
lel Exit)
OON052243
A: Emergency Braking
The warning light on the outside rear
view mirror (side view mirror), head-up
display (if equipped), an audible warn-
ing, and steering wheel vibration will
warn the driver of a collision. It assists in
braking control to prevent a collision
with a vehicle approaching from the
blind spot area.
Collision-Avoidance Assist will be acti-
vated in the following conditions.
僅 Your driving speed: Below 2 mph (3
km/h)
僅 Speed of the vehicle in your blind spot
area: Above 3 mph (5 km/h)
OON052221
A: Drive carefully
When the vehicle is stopped due to
emergency braking, the warning mes-
sage will appear on the cluster. For your
safety, the driver should depress the
6
6 33