僅 Resetting The Driver Position Memory System - Kia Telluride 2023 Owner's Manual

Features of your vehicle
WARNING
Upward/downward movement of the
seat may not work when passengers get
on/off the vehicle in order to prevent
foot injuries in certain places.
Resetting the driver position
memory system
If the driver position memory system
reset fails to work, initialize the system
as follows.
How to initialize:
1. Stop the car and open the driver's
door with the ENGINE START/STOP
button in ON and the automatic shift
lever in P (parking) position.
2. Pull the driver's seat forward as far as
possible and have the seatback
upright as much as possible using
driver's seat forward/backward
adjustment and seatback angle
(recline) movement switches.
3. Push SET button and seat forward
movement switch button for 2 sec-
onds simultaneously.
Initialization in the process:
1. Initialization begins as the alarm
sounds.
2. The seat and seatback will automati-
cally move backwards. The alarm
sound will continue while the system
is in operation.
3. Initialization will be all set after the
seat and seatback move to the center
with alarm sound being raised.
However, the initialization process will
come to a stop and the alarm sound
will stop as well.
僅 When pushing driving position
memory system button
4 30
Driver position memory system for power seat
僅 When pushing driver's seat height
adjustment switch
僅 When the driving speed exceeds 2
mph (3 km/h)
僅 When the driver's door is closed
NOTICE
僅 When the operation of the driver's
seat and alarm sound stop during the
initialization process, start the process
again.
僅 Make sure that there are no obstacles
around the driver's seat before start-
ing initialization.
僅 When the initialization is finished,
adjust the seat to a position comfort-
able for the driver and save it to the
driver position memory system.