Manual Speed Limit Assist (Msla); 僅 Manual Speed Limit Assist Operation - Kia Telluride 2023 Owner's Manual

Driver assistance system
CAUTION
Turn off Safe Exit Assist to install or
remove a trailer, carrier, or other attach-
ments. Turn on Safe Exit Assist when fin-
ished.
Limitations of Safe Exit Assist
Safe Exit Assist may not operate prop-
erly, or it may operate unexpectedly
under the following circumstances:
僅 Getting out of the vehicle where trees
or grass are overgrown
僅 Getting out of the vehicle where the
road is wet
僅 The approaching vehicle is very fast
or very slow
NOTICE
For more details on the limitations of the
rear corner radar, refer to "Blind-Spot
Collision-Avoidance Warning (BCW)" on
page 6-30.
WARNING
僅 Safe Exit Assist may not operate prop-
erly if interfered by strong electro-
magnetic waves.
僅 Safe Exit Assist may not operate for 3
seconds after the vehicle is started, or
the rear corner radars are initialized.
僅 Even if restarting the vehicle with the
sensors blocked or malfunctioned,
Safe Exit Assist may not properly
operate as the function maintains the
last setting.

Manual Speed Limit Assist (MSLA)

Manual Speed Limit Assist
(MSLA)
ONQ5041151N
1 Speed Limit indicator
2 Set speed
You can set the speed limit when you do
not want to drive over a specific speed.
If you drive over the preset speed limit,
Manual Speed Limit Assist operates (set
speed limit will blink and chime will
sound) until the vehicle speed returns
within the speed limit.
Manual Speed Limit Assist opera-
tion
Setting speed limit
1. Press and hold Driving Assist ( ) but-
ton at the desired speed. The Speed
Limit ( ) indicator will appear
on the cluster.
OON052291
2. Push the (+) switch up or (-) switch
down, and release it at the desired
speed.
Push the (+) switch up or (-) switch
down and hold it. The speed will
increase or decrease to the nearest
multiple of 5 in mph (multiple of 10) at
first, and then increase or decrease by
5 mph (10 km/h).
6
6 43