Kia Telluride 2023 Owner's Manual page 182

Features of your vehicle
僅 For more details on the precautions of
the front view camera, refer to "For-
ward Collision-Avoidance Assist (FCA)
(Sensor Fusion)" on page 6-4.
High Beam Assist setting
OON042486
A: Vehicle Settings
1 Lights
2 High Beam Assist
With the ignition switch or EV button in
the ON position, select 'Lights → High
Beam Assist' from the Settings menu to
turn on High Beam Assist and deselect
to turn off the function.
WARNING
For your safety, adjust your high beam
settings only after parking the vehicle at
a safe location.
High Beam Assist operation
Display and control
僅 After selecting 'High Beam Assist' in
the Settings menu, High Beam Assist
will operate by following the proce-
dure below.
- Place the headlamp switch in the
AUTO position and push the head-
lamp lever towards the instrument
cluster. The High Beam Assist (
indicator light will appear on the
cluster and the function will be
enabled.
4 102
- When the function is enabled, high
beam will turn on when vehicle
speed is above 25 mph (40 km/h).
When vehicle speed is below 15
mph (25 km/h), high beam will not
turn on.
- The High Beam (
will appear on the cluster when
high beam is on.
僅 When High Beam Assist is operating,
if the headlamp lever or switch is
used, the function operates as follows:
- If the headlamp lever is pulled
towards you when the high beam is
off, the high beam will turn on with-
out High Beam Assist canceled.
When you let go of the headlamp
lever, High Beam Assist will turn on
again.
- If you push the light switch towards
the instrument cluster, high beam is
turned on and High Beam Assist is
released.
- If the headlamp lever is pulled
towards you when the high beam is
on by High Beam Assist, low beam
will be on and the function will turn
off.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and the
corresponding lamp will turn on.
僅 When High Beam Assist is operating,
high beam switches to low beam if
any of the following conditions occur:
- When the headlamp of an oncom-
ing vehicle is detected.
)
- When the taillamp of a vehicle in
front is detected.
- When the headlamp or taillamp of a
motorcycle or a bicycle is detected.
Lighting
) indicator light