Table of Contents
Advertisement
Safety features of your vehicle
1. Route the seat belt webbing through
the rear seat belt guides. It will help
keep the belts from being trapped
behind or under the seats.
2nd row seat
OON032116
3rd row seat
OON032037
2. After inserting the seat belt, tighten
the belt webbing by pulling it up.
CAUTION
When pulling out to wear the seat belt,
the tongue should be slowly pulled out
of the seat belt guide so that the seat
belt guide does not come off the trim.
Releasing the seat belt:
ONQ5021100N
僅 The seat belt is released by pressing
the release button (1) on the locking
buckle.
When it is released, the belt should
automatically draw back into the
retractor.
3
26
If this does not happen, check the belt
to make sure it is not twisted, then try
again.
Rear center seat belt (3rd row)
To fasten your seatbelt:
1. Extract the tongue plate (A) from the
hole on the belt assembly cover.
OON032042
2. Insert the tongue plate (A) into the
buckle (A') until an audible "click" is
heard, indicating the latch is locked.
Make sure the belt is not twisted.
OON032122
3. Pull out the tongue plate (B) from the
pocket. Pull the tongue plate (B) and
insert it into the buckle (B') until an
audible "click" is heard, indicating the
latch is locked. Make sure the belt is
not twisted.
OON032117_2
Seat
Advertisement
Chapters
Table of Contents
