Table of Contents
Advertisement
Features of your vehicle
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7 times.
You can activate or deactivate the One
Touch Turn Signal function or choose
the number of blinking (3, 5, or 7) by
selecting "User Settings →Lights → One
Touch Turn Signal".
INFORMATION
The infotainment system may change
after software updates. For more infor-
mation, refer to the user's manual pro-
vided in the infotainment system and
the quick reference guide.
NOTICE
If the turn signal indicator stays on and
does not flash, or if it flashes abnormally,
a bulb may be burned out or have a
poor electrical connection in the circuit.
The bulb may require replacement.
Operating front fog light (if
equipped)
Fog lights are designed to provide
improved visibility when visibility is poor
due to fog, rain or snow, etc.
OON042462
The fog lights will turn on when the fog
light switch (1) is turned to the on posi-
tion after the headlight is turned on.
To turn off the fog lights:
僅 Turn the fog light switch (1) to the OFF
position.
High Beam Assist (HBA)
OON042420
High Beam Assist is a function that auto-
matically adjusts the headlamp range
(switches between high beam and low
beam) depending on the brightness of
detected vehicles and certain road con-
ditions.
Detecting sensor
Front view camera
OON052018
The front view camera is used as a
detecting sensor to detect ambient light
and brightness while driving.
Refer to the picture above for the
detailed location of the detecting sensor.
NOTICE
僅 Always keep the front view camera in
good condition to maintain optimal
performance of High Beam Assist.
Lighting
4
4
101
Advertisement
Chapters
Table of Contents
