僅 Storing Driver's Seat Positions; 僅 Recalling Positions From Memory; 僅 Setting The Easy Access Function - Kia Telluride 2023 Owner's Manual

Features of your vehicle
Storing driver's seat positions
1. Place the ENGINE START/STOP but-
ton is ON while the vehicle stop.
2. Adjust the driver's seat and outside
rearview mirror comfortable for the
driver.
3. Press SET button on the control panel.
The system will beep once.
4. Press one of the memory buttons (1 or
2) within 4 seconds after pressing the
SET button. The system will beep
twice when memory has been suc-
cessfully stored.
When recalling an adjustment memory
button while sitting in the vehicle, you
can be surprised by the setting chosen if
the memory has been adjusted by
someone else. If that occurs, immedi-
ately push the seat position control
switch in the direction of the desired
position to stop further undesired move-
ment.
Recalling positions from memory
Operate the following steps while the
vehicle is stopped:
僅 To recall a position already stored in
the memory, press the desired mem-
ory button (1 or 2). The system will
beep once, then the driver's seat will
automatically adjust to the stored
position.
If you adjust the control switch for the
driver's seat while the system is recalling
the stored position, the seat will stop and
then move in the direction that the con-
trol switch is moved.
Driver position memory system for power seat
Setting the easy access function
(if equipped)
The driver position memory system will
move the driver's seat automatically as
follows:
The driver can turn off or set the driver's
seat settings in the user settings mode in
the instrument cluster.
1. Press the MODE button (
times on the steering wheel until 'User
Settings' menu appears on the LCD.
2. Select 'Convenience → Seat Easy
Access → OFF/Normal/Extend' and
'Convenience → Seat upward/down-
ward' with the MOVE switch (
) and the OK button on the steer-
ing wheel.
僅 It will move the driver's seat rearward
when the ENGINE START/STOP but-
ton is changed to the OFF position.
僅 It will move the driver's seat forward
when the ENGINE START/STOP but-
ton is changed to the ACC or START
position and front driver's door is
opened.
僅 It will move the driver's seat forward
and upward when the ENGINE
START/STOP button is in ON. It will
move the driver's seat backward and
downward when the ENGINE START/
STOP button is in OFF.
You can activate or deactivate this fea-
ture. Refer to "Vehicle settings (infotain-
ment system)" on page 4-95.
INFORMATION
The infotainment system may change
after software updates. For more infor-
mation, refer to the user's manual pro-
vided in the infotainment system and
the quick reference guide.
) several
4
/
4 29